Brother P-touch PRO DX PT-9200DX, Service Manual

Page: 27 / 104

II - 14
[5] Removing the Bottom Cover and the Front Cover
(1) Remove screws “A” and “B” securing the ground wire.
Fig. 2.2-6 Removing the Screws Securing the Ground Wire
(2) Remove screws “C” and “D” securing the bottom cover.
Then, remove the core of the inlet bracket unit from the storage space in
the bottom cover, before removing screw “E” securing the bottom cover.
Fig. 2.2-7 Removing the Screws Securing the Bottom Cover
Screw “A”
Shield plate B
Half frame
Ground wire
Screw “B”
Core
Bottom cover
Screw “C”
Screw “D”
Bottom cover
Core
Screw “E”
Screw “E”