Brother NS2850D, Operation Manual

Page: 92 / 124

Embroidering
90
Adjusting thread tension
The upper thread tension is changed.
a
Touch .
b
Touch to loosen the upper thread tension. (The
tension number will decrease.)
Touch
to tighten the upper thread tension. (The
tension number will increase.)
c
Touch .
■
Correct thread tension
The thread tension is correct when upper thread is just
visible on the wrong side (bottom) of the fabric.
■
Upper thread is too tight
The bobbin thread will be visible on the right side (top) of
the fabric. In this instance, decrease the upper thread
tension.
■
Upper thread is too loose
The upper thread has slack. In this instance, increase the
upper thread tension.
1
Right side (top) of
fabric
2
Wrong side (bottom)
of fabric
1
Right side (top) of
fabric
2
Wrong side (bottom)
of fabric
1
Right side (top) of
fabric
2
Wrong side (bottom)
of fabric
Note
• If the upper thread is not threaded correctly or the
bobbin is not installed correctly, it may not be
possible to set the correct thread tension. If the
correct thread tension cannot be achieved,
rethread the upper thread and insert the bobbin
correctly.
• With [Embroidery Tension] on the setting screen,
the tension of the upper thread can be adjusted for
embroidering. The selected setting will be applied
to all patterns.
When embroidering, if the overall tension of the
upper thread is too tight or too loose, adjust it from
the setting screen. Touch to tighten the upper
thread tension and touch to loosen the upper
tension. If an individual embroidery pattern needs
additional fine tuning, refer to “Adjusting thread
tension” on page 90.