Brother NS2850D, Operation Manual

Page: 101 / 124

Editing Patterns (Embroidery Settings Screen)
99
EM
BRO
ID
ER
Y
4
h
Touch to cancel the current character patterns.
i
Select the character patterns for “DEF”, and then
touch
and .
j
Touch .
k
Touch , and then touch .

The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
l
Use to align the needle with the end of the
embroidering for the previous pattern.
m
Touch .
n
Lower the embroidery foot and press the “Start/Stop”
button to begin embroidering the remaining character
patterns.
Thread color sorting
This function allows you to embroider a combined pattern
while replacing the thread spool a minimal number of times.
Before starting to embroider, touch in the embroidery
settings screen to rearrange the embroidery order and sort it
by thread colors.
a
Touch .
* Touch again to check the sorted thread colors.
The embroidery color order is rearranged and sorted by thread
colors.
Touch again in the embroidery settings screen to cancel
color sorting and embroider with the original embroidery
color order.
Note
• Multi-position (extra large) embroidery frame
(Sold separately with some models)
By changing the attaching position of the multi-
position (extra large) embroidery frame using any of
the three positions (
1
,
2
and
3
), 30 cm × 13 cm
(12 inches × 5 inches) area can be embroidered
without hooping the fabric again. The embroidery
field with each section is 18 cm × 13 cm (7 inches
× 5 inches).
Use when embroidering connected or combined
characters or patterns, or large patterns.
1
Top installation position
2
Middle installation position
3
Bottom installation position
4
Embroidery field (when installed at position
1
)
5
Embroidery field (when installed at position
2
)
6
Embroidery field (when installed at position
3
)
a
b
c
d
e
f
Note
• This function does not work on overlapping
designs.