Brother MFC830, Owner'S Manual

Page: 44 / 194

36
Chapter 6
Overseas Mode
Sometimes, when sending a fax to overseas numbers, problems may be experienced. This mode
makes the MFC work better for such calls.
After you send a fax using this feature, the feature turns itself off.
1
Insert the document.
2
Press Menu , 1 , 3 , 5 .
3
Press or to select ON (or OFF), and press Set when the screen displays your selection.
4
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you are finished choosing settings and go to Step 5.
5
Enter the fax number you’re calling, and press Start .
Call Reservation
You can send a fax and let the other party know that you want to speak to them after the fax
transmission is complete. The other fax machine will ring as if it were receiving a telephone call; if
the other party picks up the handset, your MFC will ring. Lift the handset (and press
Tel for MFC-
830) to have a conversation.
If you set Call Reservation and Call Back message to ON, your machine leaves a message if the other
party does not answer.
1
Insert the document in the feeder.
2
Press Menu , 1 , 3 , 6 . The screen displays the current setting for Call Reservation.
3
Press or to select ON (or OFF).
4
If you set Call Reservation to ON, press
Set
when the screen displays your selection. The screen
displays the current setting for Call Back Message.
5
Press or to select ON (or OFF), and press
Set
when the screen displays your selection.
6
Press
1
if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press
2
if you are finished choosing settings, and go to Step 7. The screen prompts
you to enter the fax number you want to call.
7
Enter the fax number, and press
Start
.
8
If you’ve set Call Reservation to ON, pick up your handset if the MFC rings.
Print Sample Call Back Message
1
Press Menu , 1 , 3 , 6 .
2
Press or to select PRINT SAMPLE, and press Set .
3
Press Start .
You cannot use auto redial with Call Reservation. You cannot use Call
Reservation with Delayed Transmission or with Polling. You must register your
Station ID to set Call Back Message to ON.