Brother MFC830, Owner'S Manual

Page: 18 / 194

10
Setting the Station ID
You can store your name, fax number, and telephone number to be printed on the fax Cover Page,
and on all fax pages that you send. (See Electronic Cover Page in Chapter 6.)
It is important that you enter the fax and telephone numbers in the internationally standardized
format, i.e. in accordance with the following strict sequence:
- The “+” (plus) character (press key)
- Your Country Code (e.g. “44” for the United Kingdom, “41” for Switzerland)
- Your local area code minus any leading “0” (“9” in Spain)
- A space
- Your number on the local exchange, using spaces to aid readability as appropriate.
As an example, if your MFC is installed in the United Kingdom, is to be used for both fax and voice
calls, and your national telephone number is 0161 444 5555, then you must set the fax and telephone
number parts of your station ID as: +44 161 444 5555
1
Press
Menu
,
1
,
1
,
3
.
2
Enter your fax number (up to 20 digits) and press
Set
.
3
Enter your telephone number (up to 20 digits) and press
Set
.
4
Enter your name (up to 20 characters) using the dial pad and the chart. To enter a space press .
5
Press
Set
.
6
Press
Stop
.
Setting the Dialling Mode (Tone/Pulse)
Your MFC is initially set to TONE. If you are using a PULSE dial line, you can change the setting
to PULSE by following the steps below.
1
Press Menu , 1 , 1 , 1 . The screen prompts you to select TONE or PULSE.
2
Use or to select the dialling mode.
3
Press Set when the screen displays the dialling mode you want.
4
Press Stop to exit.
Although this equipment can use either Pulse or Tone signalling, only the performance of the Tone
signalling is subject to regulatory requirements for correct operation. It is therefore strongly
recommended that the equipment is set to use the Tone signalling for access to public or private
emergency services. The Tone signalling also provides faster call set up.
■
When you enter your name, (See Entering Text in Chapter 23.)
■
The telephone number you enter is used only for the Call Back Message and
Cover Page features.
■
If you do not enter a fax number, no additional information can be entered.
■
To enter a space, press once between numbers and twice between
characters.
■
If your Station ID has already been programmed, the screen prompts “1” to
make a change, or “2” to exit without changing.