Brother MFC830 Owner'S Manual Download Page 70

Page: 70 / 194

Chapter 11

Using the Options Key

The

Options

key changes the settings for paper type, video type, print size, quality and brightness

for the next video printing only. These options will be displayed in the order of the chart below.

Press

Options

Make sure the ADF is empty. Plug the cable from your video camera’s Out jack into the MFC’s
RCA pin jack.

Press

Options

Press

to select VIDEO:PAPER TYPE, VIDEO:VIDEO TYPE, VIDEO:PRINT

SIZE, or VIDEO:BRIGHTNESS and press

Set

If you selected the VIDEO:PAPER TYPE:

Press

to select paper type you are using (PLAIN, INK JET, GLOSSY, PHOTO or

TRNSPRNCY), and press

Set

If you use premium paper, the copy quality will be improved. For best results, we
recommend using Brother special paper.

Brother coated paper is ink jet paper.

If you are using non-Brother ink jet paper or Brother coated paper, select INK
JET

VIDEO:PAPER TYPE

PAPER:PLAIN

PAPER:INK JET

PAPER:GLOSSY

PAPER:PHOTO

PAPER:TRNSPRNCY

INK JET:BROTHER

INK JET:OTHER

VIDEO:PRINT SIZE

COLOR:OFF

SIZE:6X(10X7.6)

SIZE:10X7.6

VIDEO:BRIGHTNESS

SIZE:14.6X10.8

is default

VIDEO:VIDEO TYPE

COLOR:OFF

VIDEO:STILL

VIDEO:MOVING

– +

Summary of Contents for MFC830



































































































































































































Search results

Summary of Contents for MFC830

Reviews:

Brands by name

Popular brands

Brother MFC830, Owner'S Manual

Search results

Summary of Contents for MFC830

Reviews:

Brands by name

Popular brands