manualshive.com logo in svg

Brother MFC830, Owner'S Manual

Share
Download
Brother MFC830 Owner'S Manual Download Page 117

   Printer Driver Settings   

109

P

R

IN

TE

R

/S

C

A

N

N

E

R

Quality

Select the print quality. The print quality and speed are related. Higher quality takes a longer time to 
print.

Media

Select the media (type of paper). The MFC changes the way it places dots depending on the selected 
media type. To get the best print output, make sure to select the correct media type.

Selecting media type changes the print quality selection to the most suitable one as listed below. We 
recommend that you print with the preset quality for best printing result.

Draft:

300 x 150 dpi. The fastest print mode (approximately two to four times 
faster than normal mode) and gives lower ink consumption. Use this 
mode to print large volume documents or a document for proofing.

Normal:

300 x 300 dpi. Recommended mode for ordinary printouts. Good print 
quality with comfortable printing speed.

Fine:

600 x 600 dpi. Better print quality than normal and faster print speed 
than Super Fine.

Super Fine:

1200 x 1200 dpi. Use this mode to print precise images such as 
photographs. Since the print data is much larger than normal mode, 
processing time, data transfer time, and printing time will be longer.

Paper Type

Suitable print quality

Plain Paper

Normal

Ink Jet Paper 
(Coated Paper)

Fine

Glossy Paper

Super Fine

Photo Graphic Paper

Super Fine

Transparency

Normal

Transparency (mirror)

Normal

Use only genuine Brother Ink Jet Paper (Coated Paper), Glossy Paper, or 
Transparencies to get the best print quality. Non-Brother special paper may not 
produce the best quality.

Summary of Contents for MFC830



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands