Brother MFC-J4340DW Online User'S Manual Download Page 555

Page: 555 / 624

Home >

Machine Settings

Change Machine Settings from the Control Panel

> In the Event of Power

Failure (Memory Storage)

In the Event of Power Failure (Memory Storage)

•

Your menu settings are stored permanently and will not be lost.

•

Temporary settings (for example: Contrast and Overseas Mode) are lost.

•

The date and time is retained for approximately 24 hours.

•

(MFC-J4440DW/MFC-J4540DW) Other fax jobs in the machine's memory will not be lost.

Related Information

•

Change Machine Settings from the Control Panel

548

Summary of Contents for MFC-J4340DW
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J4340DW

Reviews:

Brother MFC-J4340DW, Online User'S Manual, Page: 555 / 624

Search results

Summary of Contents for MFC-J4340DW

Reviews: