manualshive.com logo in svg

Brother MFC-J4340DW, Online User'S Manual, Page: 472 / 624

Share
Download
Brother MFC-J4340DW Online User'S Manual Download Page 472

1

6. Slowly pull the jammed paper (1) out of the machine.

1 

IMPORTANT

•

DO NOT touch the encoder strip, a thin strip of plastic that stretches across the width of the machine
(1). Doing this may cause damage to the machine.

1

•

If the print head is in the right corner as shown in the illustration (2), you cannot move it. Follow these
steps:
a. Close the scanner cover, and then reconnect the power cord.

b. Open the scanner cover again, and then press and hold 

Stop/Exit

 or 

 until the print head

moves to the centre.

c. Unplug the machine from the power source and gently remove the jammed paper.

465

Summary of Contents for MFC-J4340DW

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments