manualshive.com logo in svg

Brother ImageCenter ADS-2800W, Service Manual

Share
Download
Brother ImageCenter ADS-2800W Service Manual Download Page 8

v

Confidential

SAFETY INFORMATION

 WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result 
in death or serious injuries.

 CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in 
minor or moderate injuries.

 Important

Important indicates a potentially hazardous situation which, if not avoided, may result in 
damage to property or loss of product functionality.

Prohibition icons indicate actions that must not be performed.

Electrical Hazard icons alert you to possible electrical shock.

Fire Hazard icons alert you to the possibility of fire.

Unplug icons indicate that you should unplug the machine.

Note

Notes indicates advice about how you should respond to a situation that may arise 
with your machine and/or advice about how the operation of the machine works with 
other features.

This icon indicates that flammable sprays may not be used.

This icon indicates that organic solvents such as alcohol and liquids may not be used.

Follow all warnings and instructions marked on the machine.

Summary of Contents for ImageCenter ADS-2800W



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands