manualshive.com logo in svg

Brother HL-P2000, Service Manual

The Brother HL-P2000 Quick Setup Manual is an essential companion for easy installation and initial setup of your Brother HL-P2000 printer. This comprehensive manual can be downloaded for free from manualshive.com, providing step-by-step instructions and troubleshooting tips to ensure a smooth user experience.

Share
Download
background image

I-2

  Sophisticated Viewer Software ‘WordCraft Unimessage™ Viewer Software’ (HL-
P2000)

WordCraft Unimessage™ Viewer is a sophisticated viewer for displaying and editing
graphic files. In addition to the usual image editing functions (object drawing, annotations,
highlighting, etc.) you will also be able to use this software to view both color and
monochrome images, create cover sheets for use with HL-P2000, display thumbnails of
graphics files in any of your directories and set up a referencing system for your files
using DIR (Document Indexing Retrieval).

  TWAIN Compliant Scanner Driver

The scanner driver is TWAIN compliant which is a defacto standard. You can use the
scanner from other TWAIN compliant applications as well as the PaperPort application or
Unimessage™ viewer application.

  Environment-Friendly

Economy Printing Mode

This feature will cut your printing cost by saving toner.  It is useful to obtain draft copies
for proof-reading.  You can select from two economy modes, 25% toner saving and 50%
toner saving, through the Windows printer driver supplied with your printer.

Sleep Mode (Power Save Mode)

Sleep mode automatically reduces power consumption when the printer is not in use.
The printer consumes less than 13W when in sleep mode.

Low Running Cost

The toner cartridge is separate from the drum unit.  You need to replace only the toner
cartridge after around 2,400 pages, which is cost effective and ecologically friendly.

The actual number of pages printed with each toner cartridge may vary depending on
your average type of print job.

  Enhanced Memory Management

The printer provides its own data compression technology in its printer hardware and the
supplied printer driver software, which can automatically compress graphic data and font
data efficiently into the printer's memory.  You can avoid memory errors and print most
full page 600 dpi graphic and text data, including large fonts, with the standard printer
memory.

  Remote Printer Console Program for DOS

The utility program, Remote Printer Console (RPC), is available on the floppy disk and
CD-ROM supplied with your printer.  When you operate your computer in the DOS (Disk
Operating System) environment, this program allows you to easily change the default
settings of the printer such as fonts, page setup, emulations and so on.

This program also provides a status monitor program, which is a Terminate-and-Stay
Resident (TSR) program.  It can monitor the printer status while running in the
background and report the current status or errors on your computer screen.

  Popular Printer Emulation Support
The printer supports the HP LaserJet IIP, Epson FX-850, and IBM Proprinter XL
emulations.

When you use DOS application software or Windows version 3.0 or earlier, you can use
any of these emulations to operate the printer in the 300 dpi resolution mode.  The printer
also supports Auto-emulation switching between HP and Epson or HP and IBM.  If you
want to set the emulation, you can do it using the Remote Printer Console Program.

Summary of Contents for HL-P2000







































































































































































































































































































Reviews:

No comments

Related manuals for HL-P2000

NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Brand: NEC Pages: 8
DataCard SD160 User Manual preview
SD160
Brand: DataCard Pages: 78
DataCard SP75 Plus Quick Install Manual preview
SP75 Plus
Brand: DataCard Pages: 8
DataCard CR805 User Manual preview
CR805
Brand: DataCard Pages: 136
DataCard CE840 Quick Install Manual preview
CE840
Brand: DataCard Pages: 22
DataCard CD820 Quick Install Manual preview
CD820
Brand: DataCard Pages: 16
DataCard SD260 Installation And User Manual preview
SD260
Brand: DataCard Pages: 216
DataCard CD800 Product Manual preview
CD800
Brand: DataCard Pages: 19
DataCard SP55 Plus Printer Manual preview
SP55 Plus
Brand: DataCard Pages: 30
DataCard RP90 Brochure & Specs preview
RP90
Brand: DataCard Pages: 2
DataCard SP25 Plus Brochure & Specs preview
SP25 Plus
Brand: DataCard Pages: 4
DataCard SP25 Plus Printer Manual preview
SP25 Plus
Brand: DataCard Pages: 134
DataCard CE870 User Reference Manual preview
CE870
Brand: DataCard Pages: 13
DataCard SD Series Quick Install Manual preview
SD Series
Brand: DataCard Pages: 10
DataCard SD160 Quick Install Manual preview
SD160
Brand: DataCard Pages: 8
F+D Feinwerk- und Drucktechnik TOP-ino Operating Instructions Manual preview
TOP-ino
Brand: F+D Feinwerk- und Drucktechnik Pages: 22
Macherey-Nagel NANOCOLOR UV/VIS II User Manual preview
NANOCOLOR UV/VIS II
Brand: Macherey-Nagel Pages: 6

Brands by name

Popular brands

Load more brands