manualshive.com logo in svg

Brother HL-P2000, Service Manual

Share
Download
Brother HL-P2000 Service Manual Download Page 3

PREFACE

This service manual contains basic information required for after-sales service of the laser printer
(hereinafter referred to as "this machine" or "the printer"). This information is vital to the service
technician to maintain the high printing quality and performance of the printer.

This service manual covers the MFC-P2000 / HL-P2000 printer.

This manual consists of the following chapters:

CHAPTER

 

I :

FEATURES AND SPECIFICATIONS

Features, specifications, etc.

CHAPTER II

 

: THEORY OF OPERATION

Basic operation of the mechanical system, the electrical system and the electrical
circuits and their timing information.

CHAPTER III : DISASSEMBLY AND REASSEMBLY

Procedures for disassembling and reassembling the mechanical system.

CHAPTER IV : MAINTENANCE AND TROUBLESHOOTING

Reference values and adjustments, troubleshooting image defects, troubleshooting
malfunctions, etc.

APPENDICES :

SERIAL NO. DESCRIPTIONS, DRUM LIFE & PAGE COUNTER, DIAMETER /
CIRCUMFERENCE OF ROLLERS, CONNECTION DIAGRAMS, PCB CIRCUIT
DIAGRAMS, ETC.

Information in this manual is subject to change due to improvement or redesign of the product.  All
relevant information in such cases will be supplied in service information bulletins (Technical
Information).

A thorough understanding of this printer, based on information in this service manual and service
information bulletins, is required for maintaining its print quality performance and for improving the
practical ability to find the cause of problems.

Summary of Contents for HL-P2000







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands