manualshive.com logo in svg

Brother HL-P2000, Service Manual

Share
Download
Brother HL-P2000 Service Manual Download Page 200

USER’S GUIDE

4-2

  Photo/Text

Select the copy mode from Text or Photo

1. Insert the original document face down in the Document Feeder.

2. Press the 

Photo

 button to select photo mode.

When you select Photo mode, the 

Photo

 lamp comes on.

3 . Press the 

Copy

 button to start copying.

  

  Enlarge/Reduce

You can make an enlarged or reduced size of copy from 50% to 150%
(for USA and Canada), 50% to 200% (for other countries).

1. Insert the original document face down in the Document Feeder.

2. Press the

 Enlarge/Reduce

 button and select the Enlarge/Reduce

ratio.

<For USA and Canada>
* You can reduce to 78 or 50% of the original size.

---- OR ----

* You can enlarge to 120% or 150%

<For other countries>
* You can reduce to 71 or 50% of the original size.

---- OR ----

* You can enlarge to 141% or 200%

When Enlarge/Reduce is 100%, all the LEDs are off.

3. Press the 

Copy

 button to start the copy.

✒

 Note

If the enlarged size is bigger than the copy paper,  you may lose some
portion of the original document.  In that case,  reduce the enlargement
ratio.

Summary of Contents for HL-P2000







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands