manualshive.com logo in svg

Brother HL-P2000, Service Manual

Share
Download
Brother HL-P2000 Service Manual Download Page 40

II-21

5)

Drum Cleaning Stage

In the image transfer stage, not all the toner on the photosensitive drum is transferred
onto the paper but some remains on the drum.  In the drum cleaning stage, the drum
surface is cleaned by the 

cleaning roller

, so that residual toner on the drum surface is

removed and collected on the cleaning roller itself.  The residual toner on the cleaning
roller will be discharged to the drum during starting or non-printing time.  The toner will be
collected by the developing roller and reused (for further developing).

6)

Erasing Stage

Before the cleaning stage, the drum surface is exposed to the light emitted from the

erase lamp

 (LED lamp).  This stage prepares the drum by decreasing its surface voltage

uniformly, ready to receive a uniform charge in the primary charging stage.

7)

Fixing Stage

The image transferred to the paper by static electricity is fixed by heat and pressure when
passing through the heat roller and the 

pressure roller

 in the fixing unit.  The thermistor

ASSY keeps the surface temperature of the 

heat roller

 constant by detecting the surface

temperature of the heat roller and turning on or off the halogen heater lamp.

,,

,,

,,,,

,,,,,

,,,,

,,

,

,,

,

,,,,,

,,,,,,

,,,,,,

,,,,,

,,,

,

,,

,,,,

,,

,,

,,,,

,,,,

,,

,

,,

,,

,,

,

,,

,,

Fig. 2-30

Pressure roller

Thermistor ASSY

Halogen heater lamp

Heat roller

Cleaner ASSY

Summary of Contents for HL-P2000







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands