manualshive.com logo in svg

Brother HL-960 Series, User Manual

The Brother HL-960 Series is a versatile printing solution designed for small offices and homes. With its user-friendly features, this reliable printer ensures high-quality prints every time. Access the detailed User Manual for this product, available for free download on our website, to maximize its capabilities and functionality.

Share
Download
background image

CHAPTER 1 GENERAL

1–5

Universal Paper Cassette and Manual Loading

This printer loads paper automatically from the paper cassette. Since the
paper cassette is a universal type, a number of different sizes of paper
can be used. Even envelopes can be loaded from the multi-purpose tray
and the upper paper cassette. In addition, the multi-purpose tray allows
you to load paper sheet by sheet. See 3-15 for auto loading and 3-16 for
manual loading.

Two Interfaces

This printer has a high speed bi-directional parallel interface and an RS-
232C serial interface.

If your application software supports the bi-directional parallel interface,
you can monitor the printer status. It is fully compatible with the
industry-standard bi-directional parallel interface. See page 2-17.

The RS-232C serial interface is an industry standard so that you can
connect it to any computer using a standard serial cable. See page 2-17.

Automatic Interface Selection

This printer can automatically select the bi-directional parallel or RS-
232C serial, interface depending on the interface port through which it
receives data. With this feature, the printer can be connected to more
than one computer. See page 3-5.

Four Emulation Modes

This printer can emulate the Hewlett-Packard

®

 laser printer-LaserJet 4

(PCL

®

 5e) printer, the industry-standard HP-GL™ plotter as well as

EPSON

®

 FX-850™, and IBM

®

 Proprinter XL

®

 printers.  You can print

with all application programs that support one of these printers. See page
3-1.

Summary of Contents for HL-960 Series









































































































































































































































































Reviews:

No comments

Related manuals for HL-960 Series

iFactory3D One Pro Assembly Instructions Manual preview
One Pro
Brand: iFactory3D Pages: 39
Xerox Legacy 4127 Customer Release Notes preview
Legacy 4127
Brand: Xerox Pages: 8
Oce im4530 Scanning Manual preview
im4530
Brand: Oce Pages: 136
Oce im4512 Facsimile Operation Manual preview
im4512
Brand: Oce Pages: 116
Konica Minolta bizhub C250i Quick Manual preview
bizhub C250i
Brand: Konica Minolta Pages: 61
Oki ES9466 MFP Manual preview
ES9466 MFP
Brand: Oki Pages: 20
Konica Minolta DRYPRO Model 793 Operation Manual preview
DRYPRO Model 793
Brand: Konica Minolta Pages: 156
Tally XPRESS T9412i Network User'S Manual preview
XPRESS T9412i
Brand: Tally Pages: 76
Muratec MFX-C2500 Brochure & Specs preview
MFX-C2500
Brand: Muratec Pages: 6
Xerox WorkCentre 7328 Brochure & Specs preview
WorkCentre 7328
Brand: Xerox Pages: 8
Xerox DocuPrint 205 Settings Manual preview
DocuPrint 205
Brand: Xerox Pages: 34
Oki C9000 Series User Manual preview
C9000 Series
Brand: Oki Pages: 204
Ricoh IM C6000 Series Quick Reference Copy Manual preview
IM C6000 Series
Brand: Ricoh Pages: 2
Konica Minolta bizhub PRO C65hc Additional Information preview
bizhub PRO C65hc
Brand: Konica Minolta Pages: 24
FujiFilm 16558126 User Manual preview
16558126
Brand: FujiFilm Pages: 28
Triumph Adler P-C2665 User Manual preview
P-C2665
Brand: Triumph Adler Pages: 202
Z Corporation ZPrinter 310 User Manual preview
ZPrinter 310
Brand: Z Corporation Pages: 127
Kyocera KM-C2525E Service Manual preview
KM-C2525E
Brand: Kyocera Pages: 12

Brands by name

Popular brands

Load more brands