manualshive.com logo in svg

Brother HL-960 Series, User Manual

The Brother HL-960 Series is a versatile printing solution designed for small offices and homes. With its user-friendly features, this reliable printer ensures high-quality prints every time. Access the detailed User Manual for this product, available for free download on our website, to maximize its capabilities and functionality.

Share
Download
background image

REGULATIONS

xiii

For Your Safety

To ensure safe operation the three-pin plug supplied must be inserted
only into a standard three-pin power point which is effectively grounded
through the normal household wiring.

Extension cords used with the equipment must be three-conductor and
be correctly wired to provide connection to ground. Incorrectly wired
extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that
the power is grounded and that the installation is completely safe. For
your safety, if in any doubt about the effective grounding of the power,
consult a qualified electrician.

Wiring Information (For U.K. only)

Important

If the mains plug supplied with this printer is not suitable for your
socket outlet, remove the plug from the mains cord and fit an
appropriate three pin plug. If the replacement plug is intended to take a
fuse then fit the same rating fuse as the original.

If a moulded plug is severed from the mains cord then it should be
destroyed because a plug with cut wires is dangerous if engaged in a
live socket outlet. Do not leave it where a child might find it!

In the event of replacing the plug fuse, fit a fuse approved by ASTA to
BS1362 with the same rating as the original fuse.

Always replace the fuse cover. Never use a plug with the cover omitted.

WARNING  - THIS PRINTER MUST BE EARTHED

The wires in the mains cord are coloured in accordance with the
following code :
GREEN AND YELLOW

: EARTH

BLUE : 

NEUTRAL

BROWN

: LIVE

The colours of the wires in the mains lead of this printer may not
correspond with the coloured markings identifying the terminals in your
plug.

Summary of Contents for HL-960 Series









































































































































































































































































Reviews:

No comments

Related manuals for HL-960 Series

Panasonic Workio DP-3510 Service Handbook preview
Workio DP-3510
Brand: Panasonic Pages: 12
Panasonic Workio DP-3510 Service Manual preview
Workio DP-3510
Brand: Panasonic Pages: 858
Datamax M-Class Mark II Maintenance Manual preview
M-Class Mark II
Brand: Datamax Pages: 94
Océ VarioPrint 1055 User Manual preview
VarioPrint 1055
Brand: Océ Pages: 194
Oce CS9360 Installation Manual preview
CS9360
Brand: Oce Pages: 12
JICCODA LE-1 Quick Install Manual preview
LE-1
Brand: JICCODA Pages: 46
Xerox WORKCENTRE 5735 Information Manual preview
WORKCENTRE 5735
Brand: Xerox Pages: 50
Oki C610cdn Brochure & Specs preview
C610cdn
Brand: Oki Pages: 4
SEH UT 16 Quick Installation Manual preview
UT 16
Brand: SEH Pages: 20
Lanier LD160c Brochure & Specs preview
LD160c
Brand: Lanier Pages: 6
Xerox VersaLink C400V User Manual preview
VersaLink C400V
Brand: Xerox Pages: 196
Lexmark 16C0365 - 5500 MFP Service Manual preview
16C0365 - 5500 MFP
Brand: Lexmark Pages: 88
Brady BradyPrinter A5500 User Manual preview
BradyPrinter A5500
Brand: Brady Pages: 72
G&G IMAGE L2550DW Series User Manual preview
IMAGE L2550DW Series
Brand: G&G Pages: 147
Thermo Scientific invitrogen EVOS FL Quick Reference preview
invitrogen EVOS FL
Brand: Thermo Scientific Pages: 6
Phoenix Contact THERMOMARK CARD User Manual preview
THERMOMARK CARD
Brand: Phoenix Contact Pages: 35
Oki 431dn+ User Manual preview
431dn+
Brand: Oki Pages: 138
UnionTech Martrix Series User Manual preview
Martrix Series
Brand: UnionTech Pages: 44

Brands by name

Popular brands

Load more brands