Brother HL-960 Series User Manual Download Page 2 | Manualshive

Page: 2 / 264

background image

II

Trademarks

Brother is a registered trademark of Brother Industries, Ltd.

Apple and LaserWriter are registered trademarks, and TrueType is a trademark
of Apple Computer, Inc.
Centronics is a trademark of Genicom Corporation.
EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of
Seiko Epson Corporation.
Hewlett-Packard, HP and PCL are registered trademarks, and HP LaserJet 4, HP
LaserJet Plus, HP LaserJet II, HP LaserJet IID, HP LaserJet IIID, HP-GL, HP-
GL/2, and Bi-Tronics are trademarks of Hewlett-Packard Company.
IBM, Proprinter XL, Proprinter, and IBM/PC are registered trademarks of
International Business Machines Corporation.
Intellifont is a registered trademark of AGFA Corporation, a division of Miles,
Inc.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a registered trademark of Microsoft in the U.S. and other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.

All other brand and product names mentioned in this user’s guide are registered
trademarks or trademarks of respective companies.

Compilation and Publication

Under the supervision of Brother Industries Ltd., this manual has been compiled
and published, covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to
change without notice.

Brother reserves the right to make changes without notice in the specifications
and materials contained herein and shall not be responsible for any damages
(including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the
publication.

©1994 Brother Industries Ltd.

Shipment of the Printer

If for any reason you must ship your Printer, carefully package the Printer to avoid any
damage during transit. It is recommended that you save and use the original packaging.
The Printer should also be adequately insured with the carrier.

✓

WARNING

When shipping the Printer, the TONER CARTRIDGE must be removed from the Printer.
Failure to remove the Toner Cartridge during shipping, will cause severe damage to
the Printer and will VOID THE WARRANTY.

«
1
2
3
4
...
»

Summary of Contents for HL-960 Series









































































































































































































































































Reviews:

No comments

Related manuals for HL-960 Series

Brand: CAB Pages: 40

Brand: DataCard Pages: 25

Brand: Oki Pages: 4

Brand: Oki Pages: 40

Brand: Oki Pages: 507

Brand: Oki Pages: 176

Brand: Samsung Pages: 351

Brand: Oki Pages: 140

Brand: UEi Pages: 4

Falcon Outdoor 46

Brand: MUTOH Pages: 333

Brand: A&D Pages: 31

Ecosys FS-C5300DN

Brand: Kyocera Pages: 35

Brand: EFI Pages: 168

Brand: Monarch Pages: 8

Brand: SEWOO Pages: 8

Brand: SINTERIT Pages: 16

Brand: Canon Pages: 436

Pixma TS8700 Series

Brand: Canon Pages: 589

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands