Brother HL-660 Series, User Manual

Page: 68 / 88

USER’S GUIDE
6–10
English
Questions Recommendations
I cannot print from my
application software.
•
Check the PORT selection within the
Chooser : it should match the port you
physically attached the printer cable to.
•
Check the printer cable type (you should be
using a Local-Talk type cable.)
Paper Handling
Questions Recommendations
The printer does not load
paper.
•
Note if the ALARM and PAPER lamps are
blinking. If so, the multi-purpose sheet
feeder is out of paper. Load a new stack of
paper into the feeder.
•
If there is paper in the multi-purpose sheet
feeder, make sure it is straight. If the paper
is curled, you should straighten it before
printing.
•
Reduce the stack of paper in the multi-
purpose sheet feeder, then try again.
The printer does not load
paper from the manual
feed slot. When the MANUAL lamp is blinking, press the
FF/CONT switch for manual loading.
Re-insert the paper firmly.
How can I load
envelopes? You can load envelopes from either the multi-
purpose sheet feeder or the manual feed slot.
Your application software must be set up
correctly to print on the envelope size you are
using. This is usually done in the page setup or
document setup menu of your software. Refer to
your application manual.
What paper can I use? You can use plain paper, envelopes,
transparencies, labels, and organizer paper. For
information on loading paper, see “Paper
Handling” in Chapter 2.
How can I clear paper
jams? See “PAPER JAMS” in this chapter.