Brother HL-660 Series, User Manual

Page: 67 / 88

CHAPTER 6 TROUBLESHOOTING
6–9
English
•
Questions Recommendation
I cannot print from my
application software.
•
If you are using Windows 3.1, make sure
the supplied printer driver is installed and
selected with your application software.
•
If you are using Windows 3.0 or earlier,
make sure that proper printer driver is
insatlled and selected to match the printer
emulation.
How can I change the
printer’s default settings? Exit to DOS and use the remote printer console
program.
Sometimes I get a Print
Overrun error when
printing certain
documents from
Windows.
•
Change the following settings on the driver
and try again.
Page Protection
Graphics Mode
TrueType™ Mode
User Printer TrueType™ Fonts
•
Reduce the print resolution or reduce the
complexity of your document and try again.
•
Expand the printer memory by installing
SIMM and turn page protection A4, Letter
or Legal through the supplied Windows
driver or RPC.
Sometimes I get the
Memory Full message.
How can I correct this?
•
Change the following settings on the driver
and try again.
Page Protection
Graphics Mode
TrueType™ Mode
User Printer TrueType™ Fonts
•
Another solution is to purchase more
memory.
•
Reduce the print resolution or reduce the
complexity of your document and try again.
Setting up the Printer for Apple Macintosh Computers
(When AppleTalk interface board and BR-Script 2 ROM board are installed.)
Questions Recommendation
The printer does not print. Check the following:
•
The printer is plugged in.
•
Paper is loaded.
•
No error conditions are active (any blinking
lamps on printer.)
•
Printer is on-line.