Brother HL-660 Series, User Manual

Page: 40 / 88

USER’S GUIDE
4–4
English
This printer can accept the following types of SIMMs;
Speed 60 nsec - 80 nsec
Pin Type 72 pin
Height 45.72 mm (1.8") or less
Output 32 bit or 36 bit
✒
Note
The printer has only one slot for SIMM, therefore if you want to increase
your printer memory again after you have installed a SIMM module into
the slot, you will need to remove the previously installed SIMM first. For
example if you have previously increased your memory from the standard
2MB to 4 MB by adding a 2MB SIMM and you wish to increase your
total memory to 6MB, you need to remove the installed 2MB SIMM and
install the new 4MB SIMM into the printer.