USER’S GUIDE
2–10
OUTPUT TRAY AND PAPER SUPPORT WIRE
The printer ejects paper with printed surfaces face down into the output
tray at the front of the printer.
When the output tray is closed, the ejected paper comes out sheet by sheet
through the slit at the front. When you open the tray, sheets can be
stacked on the tray.
Follow these steps to open the output tray:
1. Pull the top of the tray down.
2. Extend the paper support wire.
Fig. 2-8 Opening the Output Tray and
Extending the Paper Support Wire
You can stack up to 100 sheets in the output tray.
☛
Caution
•
When you use transparencies, remove each sheet immediately after
printing. Stacking sheets may cause toner to smear onto the back of
the previous sheet.
•
When the output tray is closed, you have to remove the ejected sheet,
or you will get a paper jam when the second sheet is ejected.
