USER’S GUIDE
6–2
For errors shown below, the printer indicates an operator call by
blinking the ALARM lamp and printing the error messages on paper.
Error
Action
Memory Full
•
Press the FF/CONT switch to print the data
remaining in the printer.
•
If you are using the supplied Windows driver, try
again after setting the TrueType mode to “Print as
Graphics” in the PRINT menu of your application
software.
•
Expand the printer memory with the optional
memory board.
•
Reduce the print resolution or reduce the
complexity of your document.
Print Overrun
•
Press the FF/CONT switch to print the data
remaining in the printer.
•
If you use the supplied Windows driver, try again
after setting the TrueType mode to ‘Print as
Graphics’ in the PRINT menu of your application
software.
•
If this does not clear the error, reduce the
complexity of your document or reduce the print
resolution.
Centronics
Interface Line
Error
•
Press the FF/CONT switch to resume printing.
•
Check that the connection between your computer
and printer is secure and correct, and check the
interface cable.
Serial Interface
Framing Error
•
Press the FF/CONT switch to resume printing.
•
Check the communication parameters settings such
as baud rate and stop bit on both your computer and
printer.
Serial Interface
Parity Error
•
Press the FF/CONT switch to resume printing.
•
Check the communication parameters settings such
as bit length and parity on both your computer and
printer.
Serial Interface
Overrun Error
•
Press the FF/CONT switch to resume printing.
•
The interface hardware may be damaged, consult
your dealer.
