Brother HL-5130 Service Manual Download Page 41

Page: 41 / 276

CHAPTER 2 INSTALLATION AND BASIC OPERATION

2-8

For Windows

98/Me users: The setup is now complete.

For Windows

2000/XP users: Follow the instructions below for setting the PC

printer port.

For Windows

2000/XP users only

(1) Click

Start

, and then

Printers and Faxes

Fig. 2-7

(2) Select the icon of the appropriate printer.
(3) From the

File

menu, select

Set as Default printer.

For Windows

2000/XP users: The setup is now complete.

For network users (for HL-5170DN only)

•

For connecting the printer to a network, it is recommended to contact the system
administrator prior to installation.

•

For the administrator: Configure the printer referring to the following instructions.

•

For installing the driver on the PC, refer to the following instructions once the administrator
has configured the printer.

1. For the administrator

Install the BRAdmin Professional Utility (Windows Users Only)

The BRAdmin Professional software utility is designed to manage your Brother network
connected devices such as network-ready printers and/or network-ready Multifunction devices
in a Local Area Network (LAN) environment.

BRAdmin Professional can also be used to manage devices of other manufacturers whose
products support SNMP (Simple Network Management Protocol).

For more information on BRAdmin Professional, go to

http://solutions.brother.com

(1) Insert the CD-ROM into your CD-ROM drive. The opening screen will appear

automatically. Follow the on-screen instruction.

(2) Click the

Install Software

icon on the menu screen.

(3) Follow the instructions on the screen. Click

BRAdmin Professional

Summary of Contents for HL-5130





















































































































































































































































































Search results

Summary of Contents for HL-5130

Reviews:

Related manuals for HL-5130

Brands by name

Popular brands

Brother HL-5130, Service Manual

Search results

Summary of Contents for HL-5130

Reviews:

Related manuals for HL-5130

Brands by name

Popular brands