Brother HL-4040CN Service Manual Download Page 271

Page: 271 / 341

Confidential

4-13

(1) Copy the necessary program file (Engine firmware) to the USB flash memory drive.

(2) Connect the USB flash memory drive to the USB direct interface on the front of the

machine.

Fig. 4-2

(3) When the machine has recognized the USB flash memory drive, the “Checking device/

Please wait” message appears on the LCD.

(4) “Direct Print” is displayed on the first line of the LCD message, and the file names will

be shown on the second line of the LCD. Press the or button to choose the
necessary program file, and press the

button.

(5) “Program Update/ Press Go” appears on the LCD. Press the

button to start.

“Program Updating/ Do not turn OFF” message appears on the LCD with Data LED
blinking while rewriting the firmware. DO NOT turn off the machine.

(6) After the completion of the firmware rewriting, “Direct Print” is displayed on the first line

of the LCD message, and the file names will be shown on the second line of the LCD
again.

(7) Remove the USB flash memory drive from the USB direct interface once the update

have finished.

Note:

- You can check the firmware version of the Engine firmware by printing the

Printer

Settings (“2.3 Printout of Printer Settings” in Chapter 5)

- If rewriting the firmware using a USB flash memory drive fails, turn the power of the

machine off and on. Follow the steps (1) to (7) again.

Summary of Contents for HL-4040CN






















































































































































































































































































































































Search results

Summary of Contents for HL-4040CN

Reviews:

Related manuals for HL-4040CN

Brands by name

Popular brands

Brother HL-4040CN, Service Manual

Search results

Summary of Contents for HL-4040CN

Reviews:

Related manuals for HL-4040CN

Brands by name

Popular brands