CHAPTER 2 INSTALLATION AND BASIC OPERATION
Confidential
2-16
(4) Using both hands, slide the manual feed slot paper guides to the width of the paper that
you are going to use.
Fig. 2-16
(5) Using both hands, put the paper or the envelope into the manual feed slot until the front
edge of the paper touches the paper feed roller. Hold the paper or the envelope in this
position until the printer automatically feeds the paper or the envelope in for a short
distance, and then let it go.
Fig. 2-17
NOTE:
•
Put the paper into the manual feed slot with the side to be printed face up.
•
Make sure the paper is neatly stacked and in the proper position on the manual feed slot. If
it is not, the paper may not be fed correctly, resulting in a skewed printout or a paper jam.
•
Do not put more than one piece of paper in the manual feed slot at one time, or it may
cause a jam.
•
If you put any Media (paper, transparency and so on) in the manual feed slot before the
printer is in the ready state, the media may be ejected without being printed on.
(6) After the printed envelope comes out of the printer, the printer will wait until you put in the
next envelope. Repeat Step (5) for each envelope you want to print.
NOTE:
•
Envelopes joints that are sealed by the manufacturer should be secure.
•
All sides should be properly folded without wrinkles or creases.
!
CAUTION:
Remove each sheet or envelope immediately after printing. Stacking the sheets or envelopes
may cause a paper jam or the paper to curl.
