HL-2030/2040/2070N SERVICE MANUAL
Confidential
2-15
(6) After the printed page comes out of the printer, put in the next sheet of paper as in Step
(4) above. Repeat for each page that you want to print.
!
CAUTION:
If you print on transparency, remove each transparency immediately after printing. Stacking
the printed transparency may cause a paper jam or the transparency to curl.
4.3
Printing on Thick Paper, Card Stock, Labels, and Envelopes from the Manual
Feed Slot
NOTE:
The printer automatically turns on the Manual Feed mode when you put paper in the manual
feed slot.
(1) Select the
Paper Size
,
Media Type
and
Paper Source
and other settings in the printer
driver.
NOTE:
For envelope users
•
When you use Envelope #10, select
Com-10
from Paper Size in the printer driver.
•
For other envelops which are not in the selection of the printer driver, such as Envelope #9
or Envelope C6, use
User Defined
… Size.
(2) Send the print data to the printer.
NOTE:
A
MANUAL FEED
status is shown by the control panel LEDs until you put a sheet of paper or
envelope in the manual feed slot.
Fig. 2-14
(3) Lift up the support flap to prevent paper from sliding off the facedown output tray.
NOTE:
If you choose not to lift up the output tray support flap, we recommend that you remove
printed pages as soon as they come out of the printer.
Fig. 2-15
