manualshive.com logo in svg

Brother HL-1070, Service Manual

Share
Download
Brother HL-1070 Service Manual Download Page 11

I-5

  2.4

Paper Specification

(1)

Multi-purpose sheet feeder loading

< Sheet Feeder 1 (Front)>

Paper size: A4, Letter, Legal, B5, A5, A6, and Executive, and other sizes of media
that can be handled by the feed mechanism, can be loaded.

69.8 to 229 mm

105 to 406mm (face down)

Feeding direction

Feedable paper weight:

60 (16lb.) to 157 (42lb.) g/m

2

Maximum load height :

22mm (200 sheets of 80g/m

2

 paper) letter size

Envelopes :

10 envelopes

Setting method: 

Pull the MP sheet feeder 1 cover toward you, insert the
stack of paper into the feeder, aligning the top edge of
the sheets, then push the cover back to its original
position.

<Sheet Feeder 2 (Rear)>

Paper size: A4, Letter, Legal, B5, and Executive, and other sizes of media that can
be handled by the feed mechanism, can be loaded, except special papers such as
envelopes, OHP sheets, labels and organizer sheets.

90 to 229 mm

250 to 406mm (face down)

Feeding direction

Feedable paper weight:

60 (16lb.) to 157 (42lb.) g/m

2

Maximum load height: 

22mm (200 sheets of 80g/m

2

 paper) letter size.

Setting method: 

Pull the MP sheet feeder 2 cover toward you, insert the
stack of paper into the feeder, aligning the top edge of
the sheets, then push the cover back to its original
position.

Download Free Service Manual and Resetter Printer at http://printer1.blogspot.com

Summary of Contents for HL-1070





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands