Brother FAX-1360 User Manual Download Page 30

Page: 30 / 124

Chapter 5

Press

to choose

Auto

Light

Dark

Press

Note

Even if you choose

Light

Dark

, the

machine will send the fax using the

Auto

setting if you choose

Photo

as the fax

resolution.

Changing Fax Resolution

The quality of a fax can be improved by
changing the fax resolution. Resolution can
be changed for the next fax or for all faxes.

To change the fax resolution for the
next fax

Make sure you are in Fax mode

Load your document.

Press

Resolution

and then

select the resolution.
Press

To change the default fax resolution

Make sure you are in Fax mode

Press

Menu

Press

to choose the resolution

you want.
Press

Note

• You can choose four different resolution

settings for faxes.

• The time to send will increase when

selecting

S.Fine

Photo

Dual access

You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory or receiving faxes. The
LCD shows the new job number and
available memory.

The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.

Note

If the

Out of Memory

message appears

while scanning documents, press

Stop/Exit

to cancel or

Start

to send the

pages scanned so far.

Standard

Suitable for most typed
documents.

Fine

Good for small print and
transmits a little slower than
Standard resolution.

S.Fine

Good for small print or artwork
and transmits slower than Fine
resolution.

Photo

Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission.

Summary of Contents for FAX-1360





























































































































Search results

Summary of Contents for FAX-1360

Reviews:

Related manuals for FAX-1360

Brands by name

Popular brands

Brother FAX-1360, User Manual

Search results

Summary of Contents for FAX-1360

Reviews:

Related manuals for FAX-1360

Brands by name

Popular brands