Brother FAX-1360 User Manual Download Page 117

Page: 117 / 124

Glossary

109

One-Touch

Keys on the machine’s control panel
where you can store numbers for easy
dialing. You can store a second number
on each key if you press

Shift

and the

One-Touch Key together.

Out of Paper Reception

Receives faxes into the machine's
memory when the machine is out of paper.

Overseas Mode

Makes temporary changes to the fax
tones to accommodate noise and static on
overseas phone lines.

Pause

Allows you to place a 3.5 second delay in
the dialling sequence stored on One-
Touch and Speed-Dial numbers. Press

Redial/Pause

as many times as needed

for longer pauses.

Polling

The process of a fax machine calling
another fax machine to retrieve waiting a
fax.

Pulse (Not available in New Zealand)

A form of rotary dialling on a telephone
line.

Quick Dial List

A listing of names and numbers stored in
One-Touch and Speed-Dial memory, in
numerical order.

Real Time Transmission

When memory is full, you can send faxes
in real time.

Remaining jobs

You can check which jobs are waiting in
memory and cancel jobs individually.

Remote Access Code

Your own four-digitcode (---

) that allows

you to call and access your machine from
a remote location.

Remote Retrieval Access

The ability to access your machine
remotely from a touch tone phone.

Resolution

The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.

Ring Delay

The number of rings before the machine
answers in

Fax Only

and

Fax/Tel

modes.

Ring Volume

Volume setting for the machine's ring.

Search

An electronic, alphabetical listing of stored
One-Touch, Speed-Dial and Group
numbers.

Speed-Dial

A pre-programmed number for easy
dialling. You must press

Search/Speed Dial

, the two digit code,

and

Start

to start the dialling process.

Standard resolution

203

97 dpi. It is used for regular size text

and quickest transmission.

Station ID

The stored information that appears on
the top of faxed pages. It includes the
sender's name and fax number.

Super Fine resolution

392

203 dpi. Best for very small print

and line art.

Temporary settings

You can choose certain options for each
fax transmission and copy without
changing the default settings.

Tone (Not available in New Zealand)

A form of dialling on the telephone line
used for Touch Tone telephones.

Transmission

The process of sending faxes over the
phone lines from your machine to the
receiving fax machine.

Transmission Verification Report

A listing for each fax sent, that shows its
date, time and number.

Summary of Contents for FAX-1360





























































































































Search results

Summary of Contents for FAX-1360

Reviews:

Related manuals for FAX-1360

Brands by name

Popular brands

Brother FAX-1360, User Manual

Search results

Summary of Contents for FAX-1360

Reviews:

Related manuals for FAX-1360

Brands by name

Popular brands