Brother DCP-L5500D User Manual Download Page 15

Page: 15 / 705

Home >

Introduction to Your Brother Machine

> Control Panel Overview

Control Panel Overview

1. Near Field Communication (NFC) Reader (available only for certain models)

You can use card authentication by touching the IC card to the NFC Reader on the control panel.

If your Android

™

device supports the NFC feature, you can print from your device or scan documents to your

device in the same way.

2. Touchscreen Liquid Crystal Display (LCD)

Access menus and options by pressing them on the Touchscreen.

3. Touchpanel

(Back)

Press to go back to the previous menu.

(Home)

•

Press to return to the Home screen.

•

While the machine is in Sleep Mode, the Home icon blinks.

(Cancel)

Press to cancel an operation (available when lit).

Dial Pad (Numerical buttons)

Press the numbers on the Touchpanel to dial telephone or fax numbers and to enter the number of copies.

Power On/Off

•

Turn the machine on by pressing

•

Turn the machine off by pressing and holding down

. The LCD displays

[Shutting Down]

for a few

seconds before going off. If you have an external telephone or TAD connected, it is always available.

(WiFi)

(For infrastructure mode)
When the

WiFi

light is on, your Brother machine is connected to a wireless access point. When the

WiFi

light

blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access
point.
(For Ad-Hoc mode)
The

WiFi

LED is always off.

Summary of Contents for DCP-L5500D

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L5500D

Reviews:

Brands by name

Popular brands

Brother DCP-L5500D, User Manual

Search results

Summary of Contents for DCP-L5500D

Reviews:

Brands by name

Popular brands