Brother CE-8080PRW, Service Manual

Page: 102 / 196

3 - 55
Main parts Application of Assembly
Application
2-11Attachment of SSVR PCB assy
1. Set the SSVR PCB assy.
1
to the front cover assy. with the 2 screws
1
.
*Key point
• Check that the speed volume
2
engaged with the groove of
the SV joint plate 3 .
• Check that the contact each button to each switch of the
SSVR PCB assy. 1 .
2. Bind the lead wires of the SSVR PCB assy.
1
and the operation PCB assy.
4
with the band
5
.
*Key point
• Refer to "Special Instructions of Wiring".
1
Torque
0.59 – 0.78 N·m
1
1
2 3
4
5
1
Taptite, Bind B
M3X10
2-12Attachment of LED lamp assy
1. Set the LED lamp assy. 1 to the front cover assy. with the screw 1 .
2. Connect the connector
2
of the LED lamp assy.
1
to the operation PCB
sub assy..
3. Hang the lead wire of the LED lamp assy.
1
on the slit
3
of the front
cover assy..
1
Torque
0.39 – 0.78 N·m
2
1 1 3
Taptite, Bind B
M3X10