3 - 44
Main parts
Application of Assembly
1-3 Attachment of Thread guide plate assy
1. Set the thread guide plate assy.
1
to the rear cover assy. with the screw
1
.
*Key point
• Check that the align the notch part of the thread guide plate
assy.
1
with the rib of the rear cover assy..
1
Torque
0.78 – 1.18 N·m
1
1
1
Taptite, Bind B
M4X10
1-4 Attachment of Thread guide supporting plate assy
1. Set the thread guide supporting plate assy.
1
to the rear cover assy. with
the screw
1
.
1
Torque
0.78 – 1.18 N·m
1
1
Taptite, Bind B
M4X10
1-5 Attachment of Bobbin winder guide assy
1. Set the bobbin winder guide assy.
1
to the rear cover assy. and then
temporarily tighten the screws
1
.
*Key point
• Fully tighten the screw
1
after performing "4-16 Adjustment :
1
Torque
Hand start
1
1
Screw, Pan (S/P washer)
M3X8DB
1-6 Attachment of Bobbin presser
1. Set the Nut 1 M3
1
to the rear cover assy..
2. Set the bobbin presser
2
to the rear cover assy., and then temporarily
tighten the screws
1
.
*Key point
• Place the bobbin presser
2
with the smaller end facing the
rear.
• Fully tighten the screw
1
after performing "4-16 Adjustment :
1
Torque
Hand start
1
1
2
Screw, Pan (S/P washer)
M3X20
Summary of Contents for CE-8080PRW
