Brother CE-8080PRW, Service Manual

Page: 32 / 196

2 - 17
Bobbin winder mechanism Basics of Assembly
Basics
1
Attachment of Bobbin winder assy
1. Set the shaft of the bobbin winder assy.
1
to the positioning part of the
rear cover assy. with the 2 screws
1
.
2. Insert the BW switch lever
2
into the positioning hole of the bobbin
winder shaft stopper
3
.
3. Place the bobbin winder shaft spring
4
and the bobbin winder shaft
stopper
3
, and secure it with the screw
2
.
*Key point
• Check that the bobbin winder assy.
1
pass over the bobbin
winder shaft spring 4 when the bobbin winder is switched.
• Check that the bobbin winder spring
4
return to the original
position when the bobbin winder is switched.
→
Refer to 3 - 64 "Bobbin winder mechanism".
1
2
Torque
1.18 – 1.57 N·m
1
3
1
2 4
2
Giza Tite
M5X16