Brother CE-8080PRW, Service Manual

Page: 132 / 196

3 - 85
Needle-presser module Application of Assembly
Application
9
Attachment of Presser foot lifter
1. Set the presser foot lifter
1
to the shaft
2
of the base holder assy., and
then attach the retaining ring E4.
*Key point
• Push the presser bar clamp
3
to the upper side, and then
attach it while pushing the bottom side of the thread release
lever
4
.
Apply EPNOC AP (N) 0 to the shaft of the base
holder assy. Small amount
XC8387***
Apply EPNOC AP (N) 0 to the operating surface of
the presser bar lifter presser bar clamp. Small amount
XC8387***
3
2
1
4
Retaining ring E4
10
Attachment of PF switch assy
1. Set the PF switch assy. 1 to the presser switch holder 2 .
*Key point
• Check that the boss part of the PF switch assy.
1
align the
positioning hole of the presser switch holder 2 .
2. Set the presser switch holder
2
to the base holder assy. with the screw
1
.
*Key point
• Check that the boss part of the PF switch assy. 1 align the
notch part of the base holder assy.
1
Torque
0.59 – 0.78 N·m
2
1
2 1
Screw, Bind
M 3X6