Brother CE-8080PRW, Service Manual

Page: 117 / 196

3 - 70
Feed and rotary module Application of Assembly
5
Attachment of Bushing presser B
1. Insert the “washer, thrust
2
” and the lower shaft bushing
3
into the lower
shaft assy.
1
.
2. Set the bushing presser B
4
to the base plate assy. with the 3 screws
1
.
3. Insert the “washer, thrust
5
” into the lower shaft assy.
1
, and then attach
the retaining ring E6.
4. Sandwich the lower shaft bushing
3
with the retaining ring E6 and the set
collar
6
and then tighten the 2 screws
2
.
*Key point
• Check that the lower shaft assy. 1 is not a wobble, and it
moves smoothly.
Lubricate the lower shaft bushing round surface
with FBK OIL RO 100. 1-2 drops
XC8388***
Apply MOLYKOTE EM30L to all of the teeth
around the lower shaft gear. Small amount
XC8385***
1
Torque
0.39 – 0.78 N·m
2
Torque
0.78 – 1.18 N·m
2 1
3
5 1
1
4
Retaining ring E6
3 6 2 2
Taptite, Bind B
M3X6
Set Screw, Socket (CP)
M4X4
6
Attachment of Upper shaft bushing
1. Insert the upper shaft bushing
2
into the lower shaft assy.
1
, and then
attach the retaining ring E6.
Lubricate the upper shaft bushing with the OILER.
1-2 drops
XZ0206***
1 Retaining ring E6
2