Brother CE-8080PRW, Service Manual

Page: 43 / 196

2 - 28
Basics of Assembly Electrical parts and motors
7
Attachment of Main PCB assy
1. Set the main PCB assy.
1
to the shutter cover
2
, and then hang on the 3
hooks
3
.
*Key point
• Check that the boss of the shutter cover
2
engaged with the
positioning hole of the main PCB assy. 1 . (A)
2. Hang the each lead wire on the guide part of the shutter cover
2
, and then
connect the each connector to the main PCB assy
1
.
*Key point
• Refer to "Special Instructions of Wiring".
3. Secure the lead wire assy: ground
4
and the main PCB assy.
1
to the
shutter cover
2
with the screw
1
.
*Key point
• Refer to "Special Instructions of Wiring".
• Check that the bobbin winder switch of the back side of the
main PCB assy. moves surely when the bobbin winder is
switched.
1
Torque
0.39 – 0.78 N·m
3
1
4
1 2
(A)
Taptite, Bind B
M3X10