Scan from Your Computer
68
3
Setting
Description
Applicable Feature
Image
OCR
File
Contrast
Adjust the setting (-50 to 50) to get the best image. The
default value of 0 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in grey
areas. You can also enter a value in the box to set the
Contrast
.
NOTE
The
Contrast
setting is only available when setting
Scan Type
to
Auto
,
Grey (Error Diffusion)
,
True
Grey
or
24bit Colour
.
Yes
Yes
Yes
Yes
Continuous
Scanning
Lets you scan multiple pages. After the page is scanned,
you can select to continue scanning or finish. Using this
method, you can scan more pages than the maximum
capacity of the document feeder.
Yes
Yes
Yes
Yes
2-sided Scanning
If you check this box, the machine scans both sides of the
document. When using the automatic 2-sided (duplex)
scan feature, you must select
Long-edge binding
or
Short-edge binding
depending on the layout of your
original to make sure that the data file created appears
correctly in the scanned document.
NOTE
The 2-sided (duplex) scanning feature is available with
lengths up to Legal size.
Yes
Yes
Yes
Yes
Plastic Card
Mode
Lets you scan cards, such as driver's licenses or
insurance cards, using these automatic settings:
Resolution
:
600 x 600 dpi
Document Size
: 2 in 1 (Auto)
2-sided Scanning
: On (
Short-edge binding
)
Auto Deskew
: On
Auto Image Rotation
: Off
NOTE
• If you want to scan a plastic card with different settings,
set
Plastic Card Mode
to off and
Resolution
to 600
dpi.
• Load only one plastic card at a time.
Yes
Yes
Yes
Yes
Default
Restore all settings to their factory default values.
Yes
Yes
Yes
Yes