Safety Instructions
Do not carry out any arbitrary alterations on the instrument.
Observe the appropriate safety regulations of national standards when installing.
Have non-functional instruments inspected by the manufacturer.
Notes to Operating Instructions
Notes give you information to which you shall pay attention to when operating the in-
strument.
Attention indicates that you must follow the given statements, which serve, for your
own safety or for safety reasons of the instrument. Disregard can lead to injuries or to
damage of the instrument.
Installation
Attention: The installation of the instrument should be carried out by professionals
well versed in the appropriate safety regulations of the national standards for electrical
engineering.
Scope of Delivery
The scope of delivery includes:
--
Data sheet "PM 984"
--
Slave displaying instrument PM 984
--
Screw clips (clamping devices) located on the side of the instrument (see data sheet)
--
10-pin plug-in screw clamp connector
--
Adhesive labels for the display unit (dimension) for the function of control input and
for the measured values, which are located on the upper side of the instrument
--
In addition, a 5-pin plug-in screw clamp connector is delivered for the /R and /K option
Unpacking and Disposal
Take the enclosed parts from the packaging and check parts for completeness. Contact the
customer service if the delivery is incomplete.
Attention: Dispose of the packing material in the corresponding containers for cardbo-
ard/paper and synthetic material.
Manual PM984
4
State July 2002 - All subject to change without notice
Summary of Contents for PM 984
Page 2: ......