3-23
Model 0254
Section 3 Operation
Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
Once activated, the SP VOR function mode is shown on the appropriate
channel display to indicate which VOR function mode is active. The setting
of the SP VOR Valve override function is memorized. After power down
and power up, the memorized SP VOR function mode will remain in the
previous mode until it is changed by the operator.
To return to Normal operation after activating one of the SP VOR function
modes:
1. Position the cursor pointing towards the appropriate channel on the
Home screen.
2. Press the ENTER/MENU key.
3. Select Instrument Configuration by pressing the ENTER/MENU key.
4. Once in the Instrument Configuration screen, scroll down to the SP
VOR Function option and select the Normal mode. The SP VOR
selection can also be accessed directly by the VOR hot key.
3-6-6 Totalization
The Totalizer function is used to provide a total of a selected channel's PV
Output Rate over time. The total is based on the Rate and Time base that
is configured in the particular channel's Instrument Configuration screen. A
Time base value must be configured for the Totalizer function to operate.
To display the Totalizer value:
1. Position the cursor pointing towards the appropriate channel on the
Home screen.
2. Press the ENTER/MENU key.
3. Select Display Configuration by pressing the ENTER/MENU key.
4. Once in the Display Configuration screen, scroll down and select the
PV Total option.