3-13
Model 0254
Section 3 Operation
Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
Check Sum
This value is the hexadecimal double word sum of the instruction read-only
memory used for factory quality assurance, and is only for viewing.
Factory Set
When the cursor is pointing to Factory Set, a pop-up warning displays
“WARNING - ENTER erases program values” at the bottom of the display.
Pressing ENTER will cause all user program values to be erased and over-
written with factory standard default values. Factory Set does NOT erase
factory pre-set calibration values, which continue to be retained.
3-5-2 Global System Power
To enter the System Power function, point the cursor to System Power on
the Global Settings screen and press the ENTER key. This is an immediate
action selection.
The System Power functions causes power to equipment connected to the
instrument to placed in an Off state, allowing the user to conduct
installation services and diagnostics. The power-off state is also useful for
placing the instrument and connected equipments in an un-powered
dormant state when the instrument is expected to remain unused for
extended periods.
The pop-up at the bottom of the display is shown on the screen only when
the cursor is pointing to System Power.
Power OFF
Press the ENTER key with the cursor pointing to
System Power. This will cause entry into the
power down state, the screen to become blank
with its back-light off, and all signals and power
to be removed from connected equipment.
Power ON
Press the START key to restore normal system
operation.
