3-15
Model 0254
Section 3 Operation
Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
3-5-4 Global Communication
To enter the Communications service screen, point the cursor to
Communications on the Global Settings screen and press the ENTER key.
The Network Addr (address) is shown on the service screen. The Network
Address is a unique identification for the instrument operating in a network
environment. It is factory pre-set and not customer programmable.
3-6 Instrument Confugration and Control
This subsection provides a detailed description of the instrument's Rate,
Batch, and Blend control functions, and the channel configuration for the
SP and PV signals.
3-6-1 Rate (Setpoint) Control
Rate control is a continuous process performed on a channel-by-channel
basis.
To configure Rate control:
1. Position the cursor pointing towards the appropriate channel on the
Home screen.
2. Press the Enter/Menu key, and select Instrument Configuration by
pressing the Enter/Menu key.
3. Once in the Instrument Configuration screen, scroll down to the SP
Function option and select Rate.
