3-17
Model 0254
Section 3 Operation
Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
Terminate Rate Control
When the channel SP Rate is set to zero, the process is off.
To set setpoint to zero, use the Setpoint hot key or the Instrument
Configuration screen.
3-6-2 PV Configuration
Independently, the controller's output signal is monitored and indicated as
the channel PV Rate, PV Signal, or PV Total, as selected in the Display
Configuration screen. The PV Signal Type and PV Full Scale values are
configured in the channel instrument configuration. Rate is a continuous
process performed on a channel-by-channel basis.
To configure the PV Signal Type and PV Full Scale values:
1. Position the cursor pointing towards the appropriate channel on the
Home screen.
2. Press the ENTER/MENU key.
3. Select Instrument Configuration by pressing the ENTER/MENU key.
4. Once in the Instrument Configuration screen, scroll down to the PV
Signal Type and PV Full Scale options and select the applicable PV
Signal Type and PV Full Scale values that are desired.
