Bromic Heating 2620970, Installation, Instruction And Service Manual

Page: 19 / 32

Flued Indoor Gas Heater - Instruction Manual
19
20 INSTALLER
Check on the technical label that is on the heat
exchanger cover, for the kind of gas that the applian-
ce uses.
Use the proper gas tubes and pipe fitting. The
etching under the appliance is a 3/8" M UNI ISO 7/1.
When the gas alimentation, is on the right side
of the appliance for eventuating any problems
use a nipples.
After the gas connection is done, do the first
seal tests.
GAS CONNECTION
This apparatus is equipped with a cable with plug for
connection to the mains power supply.
A proper earth connection is mandatory.
The manufacturer of the appliance cannot be held
liable for any damage caused by lack of proper earth
connection.
For jobs of an electrical nature, always refer to the
diagram attached to this booklet.
Never use gas and/or water pipes to earth the
appliance.
POWER CONNECTIONS