background image

Flued Indoor Gas Heater - Instruction Manual

4

We like to remember that, products that use combustion

or electrical energy there is security rule to observe

before operating.

Do not allow children to be near the appliance.

It is prohibited to turn on an electrical device if there

is a gas smell.

In this case:

- Open windows and door.

- Close the gas tap.

- Call a Technical Service Assistance. 

It is prohibited to touch the appliance with wet hand

or other parts of your body.

-Electrical Hazard:  Do not touch the appliance with

wet feet or other part of your body.

It is prohibited to clean the appliance when it is run-

ning.

It  is  prohibited  to  pull,  remove  and  wring  electric

wires  outside  the  appliance  also  if  the  electrical

supply is turned off.

It is prohibited place over the appliance, towels, tea

clothes  and  other  could  be  cause  of  inefficiency  or

also source of hazard.

It is prohibited to leave paper, plastic, or other things

of the appliance box outside within a child’s reach.

It could be potential source of hazard.

After removing the packaging, check the integrity of

the  contents.  In  case  of  discrepancies,  contact  the

Agency that sold the appliance.

The  APPLIANCE  must  be  used  as  intended  by  the

Manufacturer  and  for  the  purpose  for  which  it  was

expressly built.

The  Manufacturer  disclaims  any  contractual  and

non-contractual liability for injury to persons and ani-

mals  and  damage  to  things  caused  by  installation,

adjustment  and  maintenance  errors  or  improper

appliance use.

If  the  APPLIANCE  is  not  used  for  a  long  period  of

time, the following operations will have to be perfor-

med:

-  position  the  master  switch  of  the  appliance  on

"OFF"

- position the master switch of the system, if fitted, on

"OFF" or disconnect the plug from the power socket.

- close the gas tap

The  appliance  should  be  serviced  at  least  once  a

year.

This booklet is an integral part of the appliance and

must  therefore  be  carefully  looked  after  and

ALWAYS  accompany  the  APPLIANCE,  including

when  this  is  sold  to  another  user  or  transferred  to

another system.

In case of damage or loss, ask the Area After Sales

service of the Manufacturer for another copy.

Always  make  sure  that  curtains  or  other  objects  do

not obstruct the suction filter and the room air outlet

vent.

Only  connect  the  appliance  to  properly  earthed

power sockets.

Only  install  the  appliance  in  dry  environments  (pro-

tection IP 20)

The appliance must not be operated wherever there

are hazardous materials, vapours or liquids.

Install the appliance on a flat surface to prevent any

malfunction.

5

GENERAL

GENERAL INFORMATIONS

SAFETY RULES

GENERAL

General informations

pag.5

Safety rules

pag.5

Appliance description

pag.6

Identification

pag.6

Structure

pag.7

Technical data

pag.8

Accessories

pag.8

Electrical scheme

pag.9

Control panel

pag.10

INSTALLATION

Receiving the product

pag.11

Weight and dimension

pag.12

Installation: 

WALL FITTING

or 

FLOOR STANDING

- Apparatus choice location

pag.13

- Intake & exhaust tube fumes assemblage

pag.14

-- Tube Kit  Ø 32 o  Ø 54 mm with unique term. (Standard)

pag.16

KIT “

FLOOR STANDING

” support structure

pag.18

KIT “

PROTECTION FOR WALLS MADE OF WOOD PANELS

pag.19

Electrical collegaments

pag.20

Gas connection

pag.20

CUSTOMER SERVICE

Preliminary operations

pag.21

First service start

pag.21

Processor control box malfunction

pag.22

Controls during the first & after starting service

pag.22

Gas transformation

pag.23

Regolation

pag.24

Ordinary maintenance

pag.25

Appliance clean out

pag.25

Components replacement

pag.26

Disassembly & reassembly of the casing

pag.30

Eventual anomalies & remedies

pag.30

Useful information

pag.32

4

GENERAL

          

 

       



          

 

INDEX

Flued Indoor Gas Heater - Instruction Manual

4

We like to remember that, products that use combustion

or electrical energy there is security rule to observe

before operating.

Do not allow children to be near the appliance.

It is prohibited to turn on an electrical device if there

is a gas smell.

In this case:

- Open windows and door.

- Close the gas tap.

- Call a Technical Service Assistance. 

It is prohibited to touch the appliance with wet hand

or other parts of your body.

-Electrical Hazard:  Do not touch the appliance with

wet feet or other part of your body.

It is prohibited to clean the appliance when it is run-

ning.

It  is  prohibited  to  pull,  remove  and  wring  electric

wires  outside  the  appliance  also  if  the  electrical

supply is turned off.

It is prohibited place over the appliance, towels, tea

clothes  and  other  could  be  cause  of  inefficiency  or

also source of hazard.

It is prohibited to leave paper, plastic, or other things

of the appliance box outside within a child’s reach.

It could be potential source of hazard.

After removing the packaging, check the integrity of

the  contents.  In  case  of  discrepancies,  contact  the

Agency that sold the appliance.

The  APPLIANCE  must  be  used  as  intended  by  the

Manufacturer  and  for  the  purpose  for  which  it  was

expressly built.

The  Manufacturer  disclaims  any  contractual  and

non-contractual liability for injury to persons and ani-

mals  and  damage  to  things  caused  by  installation,

adjustment  and  maintenance  errors  or  improper

appliance use.

If  the  APPLIANCE  is  not  used  for  a  long  period  of

time, the following operations will have to be perfor-

med:

-  position  the  master  switch  of  the  appliance  on

"OFF"

- position the master switch of the system, if fitted, on

"OFF" or disconnect the plug from the power socket.

- close the gas tap

The  appliance  should  be  serviced  at  least  once  a

year.

This booklet is an integral part of the appliance and

must  therefore  be  carefully  looked  after  and

ALWAYS  accompany  the  APPLIANCE,  including

when  this  is  sold  to  another  user  or  transferred  to

another system.

In case of damage or loss, ask the Area After Sales

service of the Manufacturer for another copy.

Always  make  sure  that  curtains  or  other  objects  do

not obstruct the suction filter and the room air outlet

vent.

Only  connect  the  appliance  to  properly  earthed

power sockets.

Only  install  the  appliance  in  dry  environments  (pro-

tection IP 20)

The appliance must not be operated wherever there

are hazardous materials, vapours or liquids.

Install the appliance on a flat surface to prevent any

malfunction.

5

GENERAL

GENERAL INFORMATIONS

SAFETY RULES

GENERAL

General informations

pag.5

Safety rules

pag.5

Appliance description

pag.6

Identification

pag.6

Structure

pag.7

Technical data

pag.8

Accessories

pag.8

Electrical scheme

pag.9

Control panel

pag.10

INSTALLATION

Receiving the product

pag.11

Weight and dimension

pag.12

Installation: 

WALL FITTING

or 

FLOOR STANDING

- Apparatus choice location

pag.13

- Intake & exhaust tube fumes assemblage

pag.14

-- Tube Kit  Ø 32 o  Ø 54 mm with unique term. (Standard)

pag.16

KIT “

FLOOR STANDING

” support structure

pag.18

KIT “

PROTECTION FOR WALLS MADE OF WOOD PANELS

pag.19

Electrical collegaments

pag.20

Gas connection

pag.20

CUSTOMER SERVICE

Preliminary operations

pag.21

First service start

pag.21

Processor control box malfunction

pag.22

Controls during the first & after starting service

pag.22

Gas transformation

pag.23

Regolation

pag.24

Ordinary maintenance

pag.25

Appliance clean out

pag.25

Components replacement

pag.26

Disassembly & reassembly of the casing

pag.30

Eventual anomalies & remedies

pag.30

Useful information

pag.32

4

GENERAL

          

 

       



          

 

INDEX

Flued Indoor Gas Heater - Instruction Manual

4

We like to remember that, products that use combustion

or electrical energy there is security rule to observe

before operating.

Do not allow children to be near the appliance.

It is prohibited to turn on an electrical device if there

is a gas smell.

In this case:

- Open windows and door.

- Close the gas tap.

- Call a Technical Service Assistance. 

It is prohibited to touch the appliance with wet hand

or other parts of your body.

-Electrical Hazard:  Do not touch the appliance with

wet feet or other part of your body.

It is prohibited to clean the appliance when it is run-

ning.

It  is  prohibited  to  pull,  remove  and  wring  electric

wires  outside  the  appliance  also  if  the  electrical

supply is turned off.

It is prohibited place over the appliance, towels, tea

clothes  and  other  could  be  cause  of  inefficiency  or

also source of hazard.

It is prohibited to leave paper, plastic, or other things

of the appliance box outside within a child’s reach.

It could be potential source of hazard.

After removing the packaging, check the integrity of

the  contents.  In  case  of  discrepancies,  contact  the

Agency that sold the appliance.

The  APPLIANCE  must  be  used  as  intended  by  the

Manufacturer  and  for  the  purpose  for  which  it  was

expressly built.

The  Manufacturer  disclaims  any  contractual  and

non-contractual liability for injury to persons and ani-

mals  and  damage  to  things  caused  by  installation,

adjustment  and  maintenance  errors  or  improper

appliance use.

If  the  APPLIANCE  is  not  used  for  a  long  period  of

time, the following operations will have to be perfor-

med:

-  position  the  master  switch  of  the  appliance  on

"OFF"

- position the master switch of the system, if fitted, on

"OFF" or disconnect the plug from the power socket.

- close the gas tap

The  appliance  should  be  serviced  at  least  once  a

year.

This booklet is an integral part of the appliance and

must  therefore  be  carefully  looked  after  and

ALWAYS  accompany  the  APPLIANCE,  including

when  this  is  sold  to  another  user  or  transferred  to

another system.

In case of damage or loss, ask the Area After Sales

service of the Manufacturer for another copy.

Always  make  sure  that  curtains  or  other  objects  do

not obstruct the suction filter and the room air outlet

vent.

Only  connect  the  appliance  to  properly  earthed

power sockets.

Only  install  the  appliance  in  dry  environments  (pro-

tection IP 20)

The appliance must not be operated wherever there

are hazardous materials, vapours or liquids.

Install the appliance on a flat surface to prevent any

malfunction.

5

GENERAL

GENERAL INFORMATIONS

SAFETY RULES

GENERAL

General informations

pag.5

Safety rules

pag.5

Appliance description

pag.6

Identification

pag.6

Structure

pag.7

Technical data

pag.8

Accessories

pag.8

Electrical scheme

pag.9

Control panel

pag.10

INSTALLATION

Receiving the product

pag.11

Weight and dimension

pag.12

Installation: 

WALL FITTING

or 

FLOOR STANDING

- Apparatus choice location

pag.13

- Intake & exhaust tube fumes assemblage

pag.14

-- Tube Kit  Ø 32 o  Ø 54 mm with unique term. (Standard)

pag.16

KIT “

FLOOR STANDING

” support structure

pag.18

KIT “

PROTECTION FOR WALLS MADE OF WOOD PANELS

pag.19

Electrical collegaments

pag.20

Gas connection

pag.20

CUSTOMER SERVICE

Preliminary operations

pag.21

First service start

pag.21

Processor control box malfunction

pag.22

Controls during the first & after starting service

pag.22

Gas transformation

pag.23

Regolation

pag.24

Ordinary maintenance

pag.25

Appliance clean out

pag.25

Components replacement

pag.26

Disassembly & reassembly of the casing

pag.30

Eventual anomalies & remedies

pag.30

Useful information

pag.32

4

GENERAL

          

 

       



          

 

INDEX

Flued Indoor Gas Heater - Instruction Manual

4

We like to remember that, products that use combustion

or electrical energy there is security rule to observe

before operating.

Do not allow children to be near the appliance.

It is prohibited to turn on an electrical device if there

is a gas smell.

In this case:

- Open windows and door.

- Close the gas tap.

- Call a Technical Service Assistance. 

It is prohibited to touch the appliance with wet hand

or other parts of your body.

-Electrical Hazard:  Do not touch the appliance with

wet feet or other part of your body.

It is prohibited to clean the appliance when it is run-

ning.

It  is  prohibited  to  pull,  remove  and  wring  electric

wires  outside  the  appliance  also  if  the  electrical

supply is turned off.

It is prohibited place over the appliance, towels, tea

clothes  and  other  could  be  cause  of  inefficiency  or

also source of hazard.

It is prohibited to leave paper, plastic, or other things

of the appliance box outside within a child’s reach.

It could be potential source of hazard.

After removing the packaging, check the integrity of

the  contents.  In  case  of  discrepancies,  contact  the

Agency that sold the appliance.

The  APPLIANCE  must  be  used  as  intended  by  the

Manufacturer  and  for  the  purpose  for  which  it  was

expressly built.

The  Manufacturer  disclaims  any  contractual  and

non-contractual liability for injury to persons and ani-

mals  and  damage  to  things  caused  by  installation,

adjustment  and  maintenance  errors  or  improper

appliance use.

If  the  APPLIANCE  is  not  used  for  a  long  period  of

time, the following operations will have to be perfor-

med:

-  position  the  master  switch  of  the  appliance  on

"OFF"

- position the master switch of the system, if fitted, on

"OFF" or disconnect the plug from the power socket.

- close the gas tap

The  appliance  should  be  serviced  at  least  once  a

year.

This booklet is an integral part of the appliance and

must  therefore  be  carefully  looked  after  and

ALWAYS  accompany  the  APPLIANCE,  including

when  this  is  sold  to  another  user  or  transferred  to

another system.

In case of damage or loss, ask the Area After Sales

service of the Manufacturer for another copy.

Always  make  sure  that  curtains  or  other  objects  do

not obstruct the suction filter and the room air outlet

vent.

Only  connect  the  appliance  to  properly  earthed

power sockets.

Only  install  the  appliance  in  dry  environments  (pro-

tection IP 20)

The appliance must not be operated wherever there

are hazardous materials, vapours or liquids.

Install the appliance on a flat surface to prevent any

malfunction.

5

GENERAL

GENERAL INFORMATIONS

SAFETY RULES

GENERAL

General informations

pag.5

Safety rules

pag.5

Appliance description

pag.6

Identification

pag.6

Structure

pag.7

Technical data

pag.8

Accessories

pag.8

Electrical scheme

pag.9

Control panel

pag.10

INSTALLATION

Receiving the product

pag.11

Weight and dimension

pag.12

Installation: 

WALL FITTING

or 

FLOOR STANDING

- Apparatus choice location

pag.13

- Intake & exhaust tube fumes assemblage

pag.14

-- Tube Kit  Ø 32 o  Ø 54 mm with unique term. (Standard)

pag.16

KIT “

FLOOR STANDING

” support structure

pag.18

KIT “

PROTECTION FOR WALLS MADE OF WOOD PANELS

pag.19

Electrical collegaments

pag.20

Gas connection

pag.20

CUSTOMER SERVICE

Preliminary operations

pag.21

First service start

pag.21

Processor control box malfunction

pag.22

Controls during the first & after starting service

pag.22

Gas transformation

pag.23

Regolation

pag.24

Ordinary maintenance

pag.25

Appliance clean out

pag.25

Components replacement

pag.26

Disassembly & reassembly of the casing

pag.30

Eventual anomalies & remedies

pag.30

Useful information

pag.32

4

GENERAL

          

 

       



          

 

INDEX

Flued Indoor Gas Heater - Instruction Manual

4

We like to remember that, products that use combustion

or electrical energy there is security rule to observe

before operating.

Do not allow children to be near the appliance.

It is prohibited to turn on an electrical device if there

is a gas smell.

In this case:

- Open windows and door.

- Close the gas tap.

- Call a Technical Service Assistance. 

It is prohibited to touch the appliance with wet hand

or other parts of your body.

-Electrical Hazard:  Do not touch the appliance with

wet feet or other part of your body.

It is prohibited to clean the appliance when it is run-

ning.

It  is  prohibited  to  pull,  remove  and  wring  electric

wires  outside  the  appliance  also  if  the  electrical

supply is turned off.

It is prohibited place over the appliance, towels, tea

clothes  and  other  could  be  cause  of  inefficiency  or

also source of hazard.

It is prohibited to leave paper, plastic, or other things

of the appliance box outside within a child’s reach.

It could be potential source of hazard.

After removing the packaging, check the integrity of

the  contents.  In  case  of  discrepancies,  contact  the

Agency that sold the appliance.

The  APPLIANCE  must  be  used  as  intended  by  the

Manufacturer  and  for  the  purpose  for  which  it  was

expressly built.

The  Manufacturer  disclaims  any  contractual  and

non-contractual liability for injury to persons and ani-

mals  and  damage  to  things  caused  by  installation,

adjustment  and  maintenance  errors  or  improper

appliance use.

If  the  APPLIANCE  is  not  used  for  a  long  period  of

time, the following operations will have to be perfor-

med:

-  position  the  master  switch  of  the  appliance  on

"OFF"

- position the master switch of the system, if fitted, on

"OFF" or disconnect the plug from the power socket.

- close the gas tap

The  appliance  should  be  serviced  at  least  once  a

year.

This booklet is an integral part of the appliance and

must  therefore  be  carefully  looked  after  and

ALWAYS  accompany  the  APPLIANCE,  including

when  this  is  sold  to  another  user  or  transferred  to

another system.

In case of damage or loss, ask the Area After Sales

service of the Manufacturer for another copy.

Always  make  sure  that  curtains  or  other  objects  do

not obstruct the suction filter and the room air outlet

vent.

Only  connect  the  appliance  to  properly  earthed

power sockets.

Only  install  the  appliance  in  dry  environments  (pro-

tection IP 20)

The appliance must not be operated wherever there

are hazardous materials, vapours or liquids.

Install the appliance on a flat surface to prevent any

malfunction.

5

GENERAL

GENERAL INFORMATIONS

SAFETY RULES

Do not spray aerosols in the vicinity of this  

appliance while it is in operation.

Do not use or store flammable materials in or  

near this appliance.

Do no place articles on or against this appliance.

Do not modify this appliance.

Summary of Contents for 2620970

































Reviews: