Brocade Communications Systems VDX 8770-4, Hardware Installation Manual, Page: 63 / 141

Flush-mounting the device in the rack
DANGER
Use safe lifting practices when moving the product.
1. Unpack the rack kit.
2. Align the holes in the saddle with the holes on the mounting posts and attach the saddle using six #10-32 pan head screws that
were provided in the kit. The saddle attaches to the rear of the posts. Refer the following figure.
NOTE
Screws are inserted from the rear of the rack.
FIGURE 35 Saddle installed in the rack (screws inserted from the rear of the rack)
1. Screw locations for mounting saddle (both sides similar) -
screw must be inserted from the rear of the rack
3. Maneuver the lift with the switch in front of the saddle and adjust the height to match the saddle.
4. Slide the device onto the saddle and into the rack. Refer the following figure.
Mounting the Device
Brocade VDX 8770-4 Hardware Installation Guide
53-1002563-10 63