Brocade Communications Systems VDX 8770-4, Hardware Installation Manual, Page: 58 / 141

NOTE
Screws, clip nuts, and retainer nuts to secure the device to the rack are provided in the hardware accessory kit that
accompanies the device.
FIGURE 31 Device with Intake Air Duct Kit installed in the rack in a recessed configuration
1. Screw locations for mounting device
NOTE
For rails with round holes, use the clip nuts on the rails for securing the 10-32 screws. For rails with square holes, use
the retainer nuts. Refer to
Figure 16 on page 43 and Figure 25 on page 52.
Mounting the Device
Brocade VDX 8770-4 Hardware Installation Guide
58 53-1002563-10