Mounting the access point
2
Brocade Mobility 7131 Series Access Point Installation Guide
15
53-1001935-02
d. Attach the power adapter cable into the power connector on the Mobility
7131 Series Access Point.
e. Attach the power supply line cord to a power supply
.
CAUTION
Do not actually connect to the power source until the cabling portion of
the installation is complete.
5. Verify the behavior of the access point LEDs. For more information, see
“LED
indicators”
on page 19.
6. Align the bottom of the ceiling T-bar with the back of the access point.
7. Orient the access point chassis by its length and the length of the ceiling T-bar.
8. Rotate the access point chassis 45 degrees clockwise.
9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.
10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click
as they fasten to the T-bar.
