manualshive.com logo in svg

Brocade Communications Systems ICX 7250-24, Hardware Installation Manual, Page: 70 / 98

Share
Download
Brocade Communications Systems ICX 7250-24 Hardware Installation Manual Download Page 70

FIGURE 31

 Unlocking the bail latch

1. Bail latch

NOTE

The bail latch may be attached to either the top or the bottom of the SFP transceiver.

4. Grasp the bail latch and pull the copper or fiber-optic module out of the port.

FIGURE 32

 Removing the fiber-optic module

5. Store the copper or fiber-optic module in a safe, static-free place or in an anti-static bag.
6. Install a new copper or fiber-optic module in the port.

Installing a fiber-optic transceiver

You can install a new fiber-optic transceiver in an SFP or SFP+ slot while the device is powered on
and running.

While installing a transceiver, wear an ESD wrist strap with a plug that can be inserted in the ESD
connector on the ICX 7250 device.

DANGER
For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.

DANGER
All fiber-optic interfaces use Class 1 lasers.

Perform the following steps to install a fiber-optic transceiver.

Installing a fiber-optic transceiver

70

Brocade ICX 7250 Switch Hardware Installation Guide

53-1003622-02

Summary of Contents for ICX 7250-24



































































































Reviews:

No comments