Other
System component
Description
RESET
Reset button for hardware reset without power cycling. There is a hole in the front
panel to allow access. Sets EPS4000 to factory default settings.
RJ-45 console port
Console port for serial access to the device for management
Serial cable
RJ-45 console cable
DB9 adaptor
Serial cable to DB9 adaptor for serial connection
Weight and physical dimensions
Fully loaded: Populated with 4 RPS17 Power Supply Units (PSUs).
Model
Height
Width
Depth
Weight (empty)
Weight (fully
loaded)
EPS4000
4.37 cm
1.72 inches
43.7 cm
17.2 inches
40.6 cm
16.0 inches
4.87 kg
10.7 lb
8.35 kg
18.4 lb
Environmental requirements
Condition
Operational
Non-operational
Ambient temperature -5°C to 50°C (23°F to 122°F)
-25°C to 70°C (-13°F to 158°F)
Relative humidity
(non-condensing)
5% to 95% at 50°C (122°F)
5% to 95% at 70°C (158°F)
Altitude (above sea
level)
0 to 3,000 m (10,000 feet)
0 to 12,000 m (39,000 feet)
Shock
20 G, 11 ms, half-sine wave
33 G, 11 ms, half-sine wave
Vibration
1 G sine, 0.4 gms random, 5-500 Hz
2.4 G sine, 1.1 gms random, 5-500 Hz
Heat dissipation
Refer to RPS17 specification section in
Brocade ICX 7250 Switch Technical
Specifications
N/A
Operating noise
Single PSU installed: 46.5 to 48.3 dBA
Four PSUs installed : 53.4 dBA
N/A
Installing the EPS4000
Brocade ICX 7250 Switch Hardware Installation Guide
51
53-1003622-02