manualshive.com logo in svg

Brocade Communications Systems ICX 7250-24, Hardware Installation Manual, Page: 28 / 98

Share
Download
Brocade Communications Systems ICX 7250-24 Hardware Installation Manual Download Page 28

NOTE

You need a #2 Phillips screwdriver for rack mount installation.

Complete the following steps to mount devices in a rack. The example shows a front-mounting.

1. Remove the rack mounting kit from the shipping carton. The kit contains two L-shaped mounting

brackets and two sets of eight sink-head screws.

2. Using a Phillips screwdriver, attach the mounting brackets to the sides of the device using eight

#6-32, sink-head screws, four screws on each side.

NOTE

The #6-32, sink-head screws are for front- and mid-mounting. Use the #8-32 screws for rear-
mounting.

FIGURE 12

 Attaching the rack mounting brackets for ICX 7250

3. Remove the two-post rack kit from the shipping carton. The kit contains four rack-mounting screws

and four cage nuts.

4. Insert the cage nuts in the two-post rack where you want to mount the device.
5. Using a Phillips screwdriver, mount the device in a two-post rack using four rack-mounting screws.

Installation

28

Brocade ICX 7250 Switch Hardware Installation Guide

53-1003622-02

Summary of Contents for ICX 7250-24



































































































Reviews:

No comments